6 Ways to Fix SSD Not Recognized Error in Windows 10

Solid state drives (SSDs) have tremendous benefits over traditional magnetic hard drives, which is why many people are upgrading to a super storage solution.


SSDs have a common problem of not being recognized by the Windows operating system. If this is the case, your SSD may not show up This PC, File ExplorerAnd the disk management, Although it is connected to the computer correctly.

This issue can be particularly annoying while setting up an SSD. Read on to find out how to fix SSD detected issue in Windows 10.


1. Verify that BIOS detects SSD

Before we start with the possible fixes, you want to make sure your SSD is properly connected and detected by the BIOS (Basic Input/Output System). BIOS is the program that boots your computer. It also controls the essential tasks between the operating system and the many connected devices.

To open the BIOS menu on your computer, you usually need to press exactly the correct function key while the computer is booting up. The specific key required can vary by manufacturers.

For example, on a Dell computer, you need to press the F2 key just as the Dell logo appears. You can complete an online search to find the correct function key to access your computer’s BIOS menu.

Once in the BIOS menu, find a file long shoes list and check if SSD is listed there. If your SSD is listed there, then you can go ahead and try the solutions mentioned below. If the BIOS menu does not recognize your SSD, you may have problems with faulty hardware or need to configure the SATA controller settings under the BIOS menu.

2. Configure SSD Settings

If your BIOS does not list an SSD, you may need to reconfigure your SSD settings. The SATA controller is the hardware interface that connects the motherboard to the hard disk. If the BIOS does not detect your SSD, you can try to change the mode of the SATA controller.

The BIOS menu is different for different manufacturers, so try to look for similar settings in the manufacturer’s BIOS menu.

To configure the settings for the SATA controller:

  1. Restart the computer and enter the BIOS menu by pressing the appropriate function key.
  2. Go to Storage Options > Serial ATA > SATA Configuration or a similar location.
  3. select file IDE compatibility mode.
  4. Save changes and restart your computer.

The BIOS should now recognize the SSD, and you can start using it after Windows 10 boots up.

3. Check if the SSD is not initialized

Once you have a new SSD, you need to format it to use it in Windows 10. An unformatted SSD will not appear in File Explorer or the Disk Management service.

If you haven’t formatted your SSD yet, you can do it in a few steps:

  1. searching for Disk Management In the Start menu search bar, right-click Best Match and select Run as administrator.
  2. Right-click on the SSD that is not detected and select it Disk Format.
  3. In the Disk Format In the dialog, select the SSD you want to format and choose the partition style.
  4. click OK To start the disk formatting process.
  5. after finishing Step 4Back to Disk ManagementRight-click on your SSD amount and choose Simple new size.
  6. Follow the onscreen instructions to set the size and letter of the SSD drive.

Once the SSD is formatted, we recommend that you restart your computer for the changes to take place properly. After restarting, Windows 10 should detect the SSD, and you can access it through it File Explorer.

4. Update the storage controller drivers

Before we move on to the hard fixes, we need to make sure that your storage controller drivers are up to date. An outdated driver can cause hardware failures and can be the reason why Windows does not detect your SSD.

To update storage controller drivers:

  1. release device manager From beginning existing.
  2. Search for Storage and control devices and expand the group.
  3. Right-click on Storage Console and click Driver update.
  4. Choose Automatically search for updated driver software.

Windows will automatically install any available updates; You can then restart your computer and open files File Explorer or Disk Management Tool to check if Windows 10 now detects SSD.

5. Fix memory problems for SSD detection

Memory issues within Windows often prevent the SSD from being recognized. The Windows Memory Diagnostic The tool can detect and fix RAM and hard drive issues. You can play a file Windows Memory Diagnostic tool as below:

  1. searching for Windows Memory Diagnostic In the beginning Menu, right-click on File best matchand click Run as administrator.
  2. Save your unsaved work and select Reboot now and check for problems (recommended).

Your computer will now restart, and the diagnostic test will run automatically. The test will take several minutes to complete; After completion, your computer will automatically restart and display the test results.

You can then open files Disk Management or File Explorer To check if the SSD is now being detected by Windows 10. You can then format the SSD from Disk Management As described above.

6. Set or change the drive letter

A common reason why Windows 10 fails to recognize an SSD is a conflicting or missing drive letter. You can quickly solve this problem by changing or assigning a new drive letter to the SSD in a file Disk Management service.

To change an SSD drive letter:

  1. searching for Disk Management In the Start menu search bar, right-click Best Match and select Run as administrator.
  2. Right-click on your SSD and select Change the drive letter and paths.
  3. click Add If the drive letter does not exist, or they change Modify an existing drive letter.
  4. Select the new drive letter from the drop-down list and click OK in order to make changes.

After following the above steps, you can restart your computer, and Windows 10 will recognize the SSD. You can then access the SSD through File Explorer.

7. Update drivers disk

Sometimes an outdated buggy driver may cause SSD not detected error. A simple disk driver update might do the trick and allow the SSD to work normally. To update disk drivers on Windows 10:

  1. From beginning List, search for device manager And unlock the best match.

  2. expansion in drives option and check if SSD is listed there. If not listed under drivesYou will have to try another fix.
  3. Right click on the SSD and select Driver update.
  4. Choose Automatically search for drivers Or update it via a driver update downloaded from the manufacturer’s website.
  5. Restart your computer for changes to occur.

Fix Windows 10 SSD Not Detected

Solid state drives (SSDs) replace hard drives quickly, but they do have their problems. If your new SSD is not detected by Windows 10, it may just be a software problem that can be fixed by the Disk Management utility. We hope that the above fixes will help solve your problem.

If the problem persists, you may want to consider visiting an authorized technician to get your SSD up and running.

(Visited 1 times, 1 visits today)

Related posts